Printable heat shrink sleeves, PUR and polyolefin identification tags, and matched thermal transfer ribbon for wire, harness, panel and cable bundle identification.
Choose the product format by cable size, installation method, operating environment and print durability requirement. The three categories below cover the practical range for most wire and cable marking projects.
For wire, cable and harness identification where a printed sleeve shrinks around the cable. Confirm cable diameter, sleeve size, material, color, print content and paper spool packaging if needed.
For larger cables, cable bundles and cable tie installation. Options can include PUR tags and polyolefin materials such as RSFR and HNF where the application requires them.
Matched resin ribbon helps keep printed IDs clear after handling, abrasion and field use. Confirm ribbon width, printer compatibility and required print durability.
Use this guide to prepare the key details before sending an inquiry. It helps Lemore recommend a suitable sleeve, tag, ribbon and sample direction faster.
| Selection Item | What To Decide | Typical Reference Points | What To Send Lemore |
|---|---|---|---|
| Printable heat shrink sleeves | Choose by cable outside diameter, shrink ratio and sleeve length. | Common expanded ID references include 2.4, 3.2, 4.8, 6.4, 9.5, 12.7, 19.0, 25.0, 38.0 and 51.0 mm. 2:1 and 3:1 shrink directions can be reviewed. | Cable OD, sleeve length, color, print content, shrink ratio preference and quantity. |
| Sleeve material family | Match material to temperature, fluids, smoke requirement and project standard. | RSFR for general flame-retardant polyolefin; HMS for diesel or fluid resistance; HNF for halogen-free low-smoke needs. | Working environment, required standard, target market and document request. |
| Identification tags | Choose tag height, length, hole format and tie method for cable bundles. | PUR tags can use height references such as 10, 15 and 25 mm with 60 or 75 mm length. Polyolefin ladder-type tags can use 4-hole or 6-hole formats with multiple height and length choices. | Cable bundle diameter, tag material preference, tag size, color, print layout and cable tie method. |
| Thermal transfer ribbon | Match ribbon to sleeve/tag material and printer setup. | Black resin ribbon is commonly used. A 100 mm x 300 m ribbon is a common reference size; core and printer compatibility should be confirmed. | Printer model, material family, ribbon width, print durability requirement and sample plan. |
| Printing direction | Confirm one-side or two-side print and whether repeated marks are required. | Single-side and double-side printing can be discussed according to sleeve format and application. | Artwork, numbering rule, logo/barcode needs, print color and sample requirement. |
Use one marking source for common electrical and industrial identification needs: small wire sleeves, heat shrink labels, tag identification for large cables, and matching ribbon for durable printing.
Sleeves and heat shrink labels for cabinet wiring, terminals and electrical panel identification.
Printable sleeves and labels for harness assembly, batch control and repeatable wire IDs.
PUR or polyolefin identification tags for cable tie installation and larger printable areas.
Material and ribbon matching for abrasion, oil, diesel, outdoor handling and document review.
If your project needs custom legends, logos, sequence numbers, double-side marks or special print direction, Lemore can supply ready-to-install printed sleeves and tags. This helps buyers avoid printer investment, ribbon mismatch, unstable print quality and slow in-house setup.
For regular cable ID text, part numbers, logos, sequence numbers and repeatable project markings on sleeves or tags. Suitable when your team wants clean printed IDs without managing printer setup, ribbon matching or operator training.
For selected sleeve and tag formats that need fine characters, stable positioning, small symbols or special layout control. Share the material, drawing or print file and Lemore can review whether laser marking is suitable before sampling.
For installed markers that must remain readable from different cable directions, or for batch-ready sleeves with repeated numbers, symbols and project-specific legends. Useful for harness, panel and field installation teams.
You can start from application details instead of exact part numbers. Share the product format, cable size, working environment, print content, color, quantity and documents so Lemore can recommend a practical direction.
Testing & Documentation Support
For cable identification, a low price is not enough if the print fades, the material is mismatched, or project documents are incomplete. These test references help your team review print permanence, fire behavior and approval direction before moving to samples or bulk orders.
Use print test references to check whether sleeve markings stay readable after rubbing, solvent contact, handling and repeated project review.
Fire-performance documentation helps purchasing and engineering teams review flammability, oxygen index and smoke-related requirements before approval.
For railway and demanding industrial projects, fire-side-effects references help confirm flame behavior, smoke class and dripping behavior direction.
Are printable marking sleeves and heat shrink labels the same product family?
Yes. They are treated here as one printable sleeve/label category. The final choice depends on cable diameter, shrink ratio, material and print durability.
When should I choose identification tags instead of sleeves?
Use tags when the cable is too large for sleeve format, when cable tie installation is preferred, or when the label needs a larger printable area.
What tag materials can Lemore discuss?
Options can include PUR and polyolefin materials. Polyolefin options such as RSFR and HNF can be reviewed according to project conditions.
Why does ribbon matching matter?
The ribbon affects print clarity, abrasion resistance and readability after handling. Sleeve material, tag material and printer compatibility should be checked together.
Can I request a quote without a part number?
Yes. Send cable size, application, environment, print content, preferred material, color, quantity and document needs. Lemore can help narrow the direction.
Can samples be arranged before bulk order?
Samples can be discussed for fit, print legibility, material feel and installation review before volume purchasing.
Tell us your cable size, sleeve or tag preference, working environment, print content, color, quantity and document needs. Lemore will help recommend suitable materials, ribbon direction, samples or quotation.
sales@leheatshrink.com
10am - 10pm
@2025 Lemore Heatshrink
